KitchenAid KEWS145S Warming Drawer Service
The KEWS145S is a 24-inch stainless steel warming drawer with a 4-hour timer, automatic shutoff and sensor temperature control. It fits narrower cabinet runs, often beneath a built-in oven or beside a cooktop base in a smaller kitchen. It is also listed as the KEWS145SPA and KEWS145SSS.
Because the width is modest, the interior runs close to the element, and heavy cookware on the drawer floor can press on the sensor or the wiring. We look there first, then test the element, the sensor and the timer in turn.
We also check the drawer slides, since a drawer that closes slightly open loses heat quickly. Written price before work, 30-day workmanship warranty after it. Cookware with wet bottoms or spills inside the drawer can corrode the element contacts, so we look for residue and show you what we find before we replace any part.
A weak element, a sensor reading too high or a drawer that does not seal can all give lukewarm results. We test the element and the sensor, then check how fully the drawer closes.
It reads the temperature in the drawer and lets the control cycle the element to hold the setting. If the sensor drifts, the drawer overshoots or stays cool, so we check its reading.
A faint click as the element cycles is normal. A steady hum or buzz points to a loose control part or a vibrating panel, which we locate and secure.
Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.
