KitchenAid Induction Cooktop Code E_H: heat shutdown of the control panel

What E_H means

On KitchenAid induction cooktops such as the KICU509 and KICU569 series, E_H reports a cooktop that is too hot. The control panel switches off because the electronics reached too high an internal temperature. You see E_H on the display and the zones stop until the cooktop has cooled. It is a heat message, so give it time before trying again.

Common causes of E_H

Heavy use pushed the electronics temperature up.
Poor ventilation under or around the cooktop.
A cooling path inside the unit that is not working if E_H returns.

✓ One safe check you can try

1. Turn the zones off and lift the pans away. 2. Wait for the cooktop to cool completely. 3. Look for anything stored tightly against the unit that blocks air. 4. Reset power at the breaker for about a minute. 5. Resume cooking at a lower level and see whether E_H returns.

! Why to stop there

Skipping the cool-down only brings E_H right back.
Open vents and patience resolve many cases without a repair.
If it recurs, we find the cause and put the price in writing first.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Cooktop codes

Performance Boost Flashing - Power Level ChangesKitchenAid Induction Cooktop Performance Boost Flashing: power levels change between zones F61KitchenAid Induction Cooktop Code F61: a wide net of touch control, module, wiring and supply Power Level Lower Than Level RequestedKitchenAid Induction Cooktop: power level lower than the level you requested F63KitchenAid Induction Cooktop Code F63: touch control, power module or supply need checking U uKitchenAid Induction Cooktop Symbol "U u": pan not recognized on the zone F64KitchenAid Induction Cooktop Code F64: the touch control and power module group FC E0KitchenAid Induction Cooktop Code FC E0: supply, wiring or the induction module FC E1KitchenAid Induction Cooktop Code FC E1: touchpad or the cable behind it

E_HE_H questions

Why does the cooktop show E_H and quit?

The electronics inside got too hot. The panel switches off to protect them and will not heat again until they cool down. Cooling down fully is the part people tend to rush.

Does E_H damage the cooktop?

A single shutdown is the cooktop protecting itself. Repeated overheating can wear the electronics, so do not ignore a pattern of E_H messages. Cooktops expect some heat, but not constant shutdowns.

Can you repair a cooktop that keeps overheating?

Yes. We inspect it, tell you the price in writing before we start, and our repair is covered by a 30-day warranty. The estimate is in your hands before any tools come out.