Power failure. The dryer lost power during a cycle and shows PF. Pressing and holding START resumes drying. It appears once power returns, and it is only a notice.

Why does PF keep appearing?

If your home had no outage, check the breaker and the plug. A loose connection can cut power briefly. If the supply is solid, the dryer needs a look.

It is only a notice about an interrupted cycle. We check the supply and the dryer if it repeats, and quote in writing first. Dryers are safe with this message.

KitchenAid Front-Load Dryer Message "PF": power failure interrupted the cycle

What PF means

On KitchenAid front-load dryers from about 2005 to 2008, such as the KEHS01PWH electric and KGHS01PWH gas models, PF stands for power failure. The drying cycle was interrupted by a loss of power. It is a status message, not a damaged part. You see PF on the display, and to restart, press and hold START (HOLD TO START). The clothes stay damp until you restart it.

Common causes of PF

A power outage interrupted the cycle.
A tripped breaker or loose plug cut power briefly.
A power surge or flicker reset the control.

✓ One safe check you can try

1. Check that the household power is on and the breaker has not tripped. 2. Make sure the dryer plug is fully seated, if accessible. 3. Press and hold START until the dryer restarts. 4. Let the cycle finish. 5. If PF appears often with steady household power, call us.

! Why to stop there

PF after an outage is normal and needs no repair.
Frequent PF with steady household power could mean a supply or control issue.
In that case the price comes first in writing, with a 30-day guarantee.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

KitchenAid Front-Load Dryer Message “PF”: power failure interrupted the cycle

What PF means

Common causes of PF

Still unsure about PF?