KitchenAid KDRS483V Sensor Repair
The KDRS483V, also sold as the KDRS483VSS, is a discontinued KitchenAid range that owners often bring in when the oven no longer matches its setting. A cake that burns at 350 or a roast that stays pale are the clues that the temperature sensor has drifted.
The next suspect is the oven igniter. If it glows but never lights the burner, it can no longer pull enough current to open the gas valve. On the cooktop we check for burners that click without lighting, and on electric versions for an element or switch that has given out. We start by comparing the oven with a thermometer, then test the sensor resistance.
A gas odor in the kitchen is a reason to leave immediately and call the utility from outdoors. We give you a written price first, with a 30-day workmanship warranty on our work.
Place an oven thermometer on the middle rack, set 350, and compare after twenty minutes. A big gap suggests the sensor has drifted, and we test its resistance to confirm.
The igniter weakens with age and may glow without drawing enough current for the gas valve to open. We check amperage and replace the igniter if needed.
The sensor sits inside the oven cavity, and we usually reach it through the back wall. We then check the wiring connector before installing the new sensor.
Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.
