Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent KitchenAid specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 903-2606 Schedule Service
Model library · KitchenAid Range

KESV908P

KitchenAid KESV908P Range Service

Schedule Service(713) 903-2606
KitchenAid range

Most common issues on this model

  1. A torn or hardened oven door seal that lets warmth escape
  2. Door lock stuck after a self-clean cycle
  3. A relay that clicks but no longer passes power to its load
  4. A dim or flickering clock display

The KESV908P turns up as the KESV908PMT and the KESV908PSS, and a rating plate reading KESV908PMT00 is on record. Ranges of this generation lean on a control board and touch panel, so when they age, the trouble tends to be electronic and mechanical at once.

We take the door first, since hinge sag and a flattened gasket let heat out and make the oven work harder. After that, the lock. A latch that stays engaged after cleaning needs the motor and switch tested, and it must never be forced. The control board and panel come next: we test relays one by one, and we check the panel connection before blaming the board. Our quote is written before we start, and the repair carries a 30-day workmanship warranty.

Key features

  • KitchenAid KESV908P range
  • Also sold as KESV908PMT and KESV908PSS
  • Rating-plate revision code recorded: KESV908PMT00
→Codes

Error codes this model can show

Start Button BlinkingKitchenAid Range Message "Start Button Blinking": press Start to begin Start Button - Solid LightKitchenAid Range Message "Start Button - Solid Light": Sabbath Mode lighting Temp/Mod KnobKitchenAid Range Message "Temp/Mod Knob": solid white indicator lights Understanding Tones or BeepsKitchenAid Range Message "Understanding Tones or Beeps": when the range sounds White Blinking LightsKitchenAid Range Message "White Blinking Lights": oven waiting at Start WiFi Indicator LightKitchenAid Range Message "WiFi Indicator Light": connectivity status lamp Press Cancel to ResetKitchenAid Range Message "Press Cancel to Reset": Clear the Error Probe or Insert ProbeKitchenAid Range Display "Probe" or "Insert Probe": Meat Probe Needed
KESV908PKESV908P questions
Does my KESV908PMT need different parts than the KESV908PSS?

Internal parts are shared, since the MT and SS versions are finishes of one KESV908P range. Because a rating plate code such as KESV908PMT00 is on record, we read yours and order the board or sensor that matches it exactly.

The touch pads on my KESV908P stopped responding. Is the panel dead?

It might be, but a loose ribbon or a failing board can look the same. We test the connection and the board outputs before deciding which part is bad.

Why does heat escape around my KESV908P door?

A worn gasket or dropped hinge is the usual reason. We check how the door meets the frame and replace whichever part is out of shape.

Book a visit

Book repair for your KESV908P

Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.

(713) 903-2606
☎ Call the desk ▤ Schedule Service