KitchenAid Range Message "White Blinking Lights": oven waiting at Start

What White Blinking Lights means

On KitchenAid commercial-style ranges with knob controls and app connectivity, such as the KFGC500JSS and KFGC506JSS, you may see the controls glowing a steady white while the Start button blinks and the oven is not starting. That pattern is the range waiting for Start to be pressed. Owners typically notice the oven staying cold and think the burners or oven element failed, when the cycle has only been selected and not yet begun.

Common causes of White Blinking Lights

The mode and temperature were set but the cycle has not been started
The Start button prompt is still active
The oven control is working normally

✓ One safe check you can try

1. Confirm the knob lights are steady white and only Start is blinking. 2. Press the blinking Start button. 3. Check that the display or lights change and the oven begins to heat. 4. If the prompt has timed out, set the mode and temperature once more and press Start. 5. If it still will not start, call us. On a gas range, leave the house and call the gas utility if you smell gas.

! Why to stop there

The blinking is a prompt, not a failure, so there is usually nothing to replace
Parts swapped without a cause would not change the way the prompt works
If a press on Start does nothing, we can examine the control and give a written price before any work

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

Press Cancel to ResetKitchenAid Range Message "Press Cancel to Reset": Clear the Error Probe or Insert ProbeKitchenAid Range Display "Probe" or "Insert Probe": Meat Probe Needed PUSH or PSHKitchenAid Range Display "PUSH" or "PSH": Start Not Pressed Remote Indicator LightKitchenAid Commercial-Style Range Remote Indicator Light: Remote-Enabled Sabbath ModeKitchenAid Range "Sabbath Mode": Bake Stays On Sabbath, Sab, 5Ab, or 5A7KitchenAid Range Code Sabbath, Sab, 5Ab, or 5A7: Sabbath Mode is on Start Button BlinkingKitchenAid Range Message "Start Button Blinking": press Start to begin Start Button - Solid LightKitchenAid Range Message "Start Button - Solid Light": Sabbath Mode lighting

White Blinking LightsWhite Blinking Lights questions

Why is Start blinking while the other lights are steady?

With steady white controls and a blinking Start button, the oven is waiting on you to press Start. Nothing has started heating until that press is made.

My oven is cold and the light blinks. Is it broken?

Most likely not. A cold oven with this pattern means the cycle was selected but not started. Press Start and watch for heating before you assume anything has failed.

When should I call for service?

Call if you press Start, the lights stay in the same pattern and the oven never heats. At that point the prompt is no longer the cause and the control needs a technician's inspection.

KitchenAid Range Message “White Blinking Lights”: oven waiting at Start

What White Blinking Lights means

Common causes of White Blinking Lights

Other Range codes

Still unsure about White Blinking Lights?