KitchenAid Range Code 1c8c: Oven control message

What 1c8c means

Among KitchenAid's lower-case range codes, 1c8c is another entry that points to the oven control, or to the wiring associated with it. It closes out the 1c8 group with 1c81 and 1c82. Because the code is not linked to a model, the same meaning applies wherever it shows. Expect the display to hold the code and the oven to ignore commands.

Common causes of 1c8c

Oven control reporting a condition
Wiring that serves the control
Control needing a professional test

✓ One safe check you can try

1. Press Cancel or Off. 2. Wait a few minutes with the range idle. 3. Switch the breaker off for one minute and on again. 4. Run a short low bake. 5. If 1c8c comes back, leave the oven off and call us.

! Why to stop there

Controls and connectors sit behind panels and carry live current.
Only a measured test tells us whether the board or the wiring needs work.
We provide a written quote and a 30-day workmanship warranty.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

Probe or Insert ProbeKitchenAid Range Display "Probe" or "Insert Probe": Meat Probe Needed PUSH or PSHKitchenAid Range Display "PUSH" or "PSH": Start Not Pressed Remote Indicator LightKitchenAid Commercial-Style Range Remote Indicator Light: Remote-Enabled Sabbath ModeKitchenAid Range "Sabbath Mode": Bake Stays On Sabbath, Sab, 5Ab, or 5A7KitchenAid Range Code Sabbath, Sab, 5Ab, or 5A7: Sabbath Mode is on Start Button BlinkingKitchenAid Range Message "Start Button Blinking": press Start to begin Start Button - Solid LightKitchenAid Range Message "Start Button - Solid Light": Sabbath Mode lighting Temp/Mod KnobKitchenAid Range Message "Temp/Mod Knob": solid white indicator lights

1c8c1c8c questions

Does 1c8c use a different fix from 1c81?

No. All three in the 1c8 group name the oven control or its wiring, so the diagnosis follows the same path whichever one your range prints.

Could this be only the display?

The code refers to the oven control and its wiring. We confirm what is happening with a proper test before any part is replaced, so you do not pay for a guess.

Is the repair covered by a warranty?

Our repair carries a 30-day workmanship warranty. We give the price in writing before work begins, and we do not speak for any manufacturer coverage.