KitchenAid Range Code 1d11: Oven temperature sensor concern

What 1d11 means

On KitchenAid ranges, code 1d11 indicates there may be a problem with the oven temperature sensor, the control, or the associated wiring. It begins the 1d group, which also holds 1d12, 1d21 and 1d22, and no model is named. You may see the code on the display with an oven that heats unevenly, stops heating or will not preheat. The code is printed in lower case, exactly as shown here.

Common causes of 1d11

Oven temperature sensor not reporting properly
Control reading the sensor signal
Wiring between the sensor and the control

✓ One safe check you can try

1. Cancel the bake or broil. 2. Let the oven cool completely. 3. Check that nothing touches the sensor probe inside the oven cavity. 4. Take the breaker off for a minute and restore it. 5. Try a short bake. Call us when 1d11 shows a second time.

! Why to stop there

The sensor, control and wiring give similar signs, so testing separates them.
Sensor replacement may be simple, but a wrong guess adds cost.
Quotes come in writing, and we warrant our work for 30 days.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

Press Cancel to ResetKitchenAid Range Message "Press Cancel to Reset": Clear the Error Probe or Insert ProbeKitchenAid Range Display "Probe" or "Insert Probe": Meat Probe Needed PUSH or PSHKitchenAid Range Display "PUSH" or "PSH": Start Not Pressed Remote Indicator LightKitchenAid Commercial-Style Range Remote Indicator Light: Remote-Enabled Sabbath ModeKitchenAid Range "Sabbath Mode": Bake Stays On Sabbath, Sab, 5Ab, or 5A7KitchenAid Range Code Sabbath, Sab, 5Ab, or 5A7: Sabbath Mode is on Start Button BlinkingKitchenAid Range Message "Start Button Blinking": press Start to begin Start Button - Solid LightKitchenAid Range Message "Start Button - Solid Light": Sabbath Mode lighting

1d111d11 questions

Where is the oven temperature sensor?

It is a thin probe inside the oven cavity that tells the control how hot the oven is. Do not bend it or pull on it; a technician checks it and its wiring.

Is 1d11 only the sensor?

The message lists the sensor, the control or the wiring, so we test all three before replacing anything. That keeps you from paying for a part that was not the cause.

Is the oven safe to leave on?

Do not run the oven while this code shows. A control that may be reading a bad sensor cannot regulate heat properly, so food can burn or stay raw.