KitchenAid Range Code F1 E0: oven control or its wiring

What F1 E0 means

On KitchenAid freestanding and slide-in ranges, such as the KFEG500ESS, KFGG500ESS or KSEG700ESS, F1 E0 points to the oven control, or the wiring connected to it. You will see F1 and E0 shown together on the display, and the oven may stop its cycle. It belongs to the F1 group, whose second part tells our technicians which reading to check first.

Common causes of F1 E0

The oven control has an internal problem
Wiring connected to the control is loose or damaged

✓ One safe check you can try

1. Press Cancel and note the full F1 E0 reading. 2. Shut off the range at its breaker for a full minute. 3. Restore power, set the clock, and start a short bake. 4. If the range is gas and you smell gas at any point, leave and call the gas utility from outside. 5. If F1 E0 returns, stop using the oven and call us.

! Why to stop there

The control and harness sit behind the panel near live parts
Replacing a control without testing its wiring first can leave the code in place

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

Press Cancel to ResetKitchenAid Range Message "Press Cancel to Reset": Clear the Error Probe or Insert ProbeKitchenAid Range Display "Probe" or "Insert Probe": Meat Probe Needed PUSH or PSHKitchenAid Range Display "PUSH" or "PSH": Start Not Pressed Remote Indicator LightKitchenAid Commercial-Style Range Remote Indicator Light: Remote-Enabled Sabbath ModeKitchenAid Range "Sabbath Mode": Bake Stays On Sabbath, Sab, 5Ab, or 5A7KitchenAid Range Code Sabbath, Sab, 5Ab, or 5A7: Sabbath Mode is on Start Button BlinkingKitchenAid Range Message "Start Button Blinking": press Start to begin Start Button - Solid LightKitchenAid Range Message "Start Button - Solid Light": Sabbath Mode lighting

F1 E0F1 E0 questions

What does the E0 part of F1 E0 add?

The F1 group points to the oven control system, and the second part is a sub-code we note when diagnosing. Please read us the full F1 E0 display when you call.

Could this clear by itself?

A power disturbance can leave a one-time code that clears after a reset. If F1 E0 returns on its own, treat it as a control or wiring problem and avoid heavy use of the oven.

What does a visit include?

We read the code, check the wiring and test the control, then explain what we found and give a written price before any work. Repairs are covered by a 30-day workmanship warranty.