KitchenAid Older Range Code F1-H: temperature sensor or control reading

What F1-H means

The F1-H code on older KitchenAid ranges with hyphen-format electronic oven control codes is listed as a problem with the oven temperature sensor, the control, or the wiring. The range cannot get a dependable reading of oven heat. F1-H appears in the display window, and baking or broiling may not start or may be canceled partway through. The heating elements or burner itself are not named in the listing.

Common causes of F1-H

The oven temperature sensor is no longer reading accurately
The control is misreading the sensor
The sensor wiring has a bad connection

✓ One safe check you can try

1. Press Cancel, then let the oven cool with the door open. 2. Make sure nothing covers the sensor area on the oven wall. 3. Switch the range off at its breaker for one minute and back on. 4. Preheat to a moderate temperature and watch the display. 5. If F1-H comes back, stop baking and call us.

! Why to stop there

Checking the sensor takes a meter and access behind the range
A control board is the most costly guess, so it should never be the first one

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

Start Button - Solid LightKitchenAid Range Message "Start Button - Solid Light": Sabbath Mode lighting Temp/Mod KnobKitchenAid Range Message "Temp/Mod Knob": solid white indicator lights Understanding Tones or BeepsKitchenAid Range Message "Understanding Tones or Beeps": when the range sounds White Blinking LightsKitchenAid Range Message "White Blinking Lights": oven waiting at Start WiFi Indicator LightKitchenAid Range Message "WiFi Indicator Light": connectivity status lamp Press Cancel to ResetKitchenAid Range Message "Press Cancel to Reset": Clear the Error Probe or Insert ProbeKitchenAid Range Display "Probe" or "Insert Probe": Meat Probe Needed PUSH or PSHKitchenAid Range Display "PUSH" or "PSH": Start Not Pressed

F1-HF1-H questions

Does the letter H mean the oven is too hot?

Not according to the listing. F1-H points to the sensor, the control or the wiring, so treat it as a reading problem rather than proof that the oven overheated.

Is F1-H the same as F1-L?

They share the same listed meaning: the oven temperature sensor, the control or the wiring. We record the letter you see and start with the sensor for both.

How soon can you test it?

We schedule diagnostic visits as soon as we can. Tell us the exact code and whether it appears at preheat. You get a written price after the test, before any repair.