KitchenAid Range Code F2 E3: keypad, control and wiring check

What F2 E3 means

On KitchenAid freestanding and slide-in ranges such as the KFGG500ESS, F2 E3 is listed as a user interface or keypad problem, a control problem, or a wiring problem. It belongs to the same group as F2 E1 and F2 E2. The display shows F2 E3 where the time of day appears, and the oven may not accept commands from the pads.

Common causes of F2 E3

The user interface or keypad is not working properly
The control cannot read the keypad
Wiring between the two is loose or damaged

✓ One safe check you can try

1. Press Cancel once and wait. 2. Wipe the touch panel with a soft cloth that is only slightly damp. 3. Cut power at the breaker for one minute and restore it. 4. Set the clock and press a few pads. 5. If F2 E3 shows again, stop using the oven and call us with the exact display.

! Why to stop there

The keypad is connected to the control through live wiring
An accurate diagnosis separates the keypad from the board before any part is bought

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

Temp/Mod KnobKitchenAid Range Message "Temp/Mod Knob": solid white indicator lights Understanding Tones or BeepsKitchenAid Range Message "Understanding Tones or Beeps": when the range sounds White Blinking LightsKitchenAid Range Message "White Blinking Lights": oven waiting at Start WiFi Indicator LightKitchenAid Range Message "WiFi Indicator Light": connectivity status lamp Press Cancel to ResetKitchenAid Range Message "Press Cancel to Reset": Clear the Error Probe or Insert ProbeKitchenAid Range Display "Probe" or "Insert Probe": Meat Probe Needed PUSH or PSHKitchenAid Range Display "PUSH" or "PSH": Start Not Pressed Remote Indicator LightKitchenAid Commercial-Style Range Remote Indicator Light: Remote-Enabled

F2 E3F2 E3 questions

Does F2 E3 stop the stovetop too?

The code concerns the oven control and keypad, so some surface burners may still work. If controls act unpredictably, switch the range off at its breaker and call us.

Why can the same listing apply to F2 E1, E2 and E3?

They are separate readings that share a meaning: the keypad, the control, or the wiring. We note the exact reading so our checks begin in the right place.

How should I describe the problem on the phone?

Tell us the full display, F2 E3, which pads respond, and whether the oven heats. We use that to plan the visit and quote a written price after the test.