KitchenAid Range Code F3: oven control or wiring problem

What F3 means

On KitchenAid freestanding and slide-in ranges, such as the KFEG500ESS, KFGG500ESS or KSEG700ESS, a plain F3 is listed as pointing to the oven control or the wiring tied to it. It is the standalone code, and the F3 readings with an E suffix are covered separately. F3 appears in the clock window, and the oven may not run a cycle until the control has been checked.

Common causes of F3

The oven control has developed an internal problem
Wiring to the control is loose or damaged

✓ One safe check you can try

1. Press Cancel and see whether the display clears. 2. Switch the range off at its breaker for a full minute, then restore power. 3. Set the clock and start a short bake. 4. On a gas or dual-fuel range, a gas smell means you should leave and phone the gas utility from outside. 5. Should F3 return, leave the oven off and call us.

! Why to stop there

The control is a live circuit board behind the panel
Testing the wiring comes before any decision to replace a control

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

Probe or Insert ProbeKitchenAid Range Display "Probe" or "Insert Probe": Meat Probe Needed PUSH or PSHKitchenAid Range Display "PUSH" or "PSH": Start Not Pressed Remote Indicator LightKitchenAid Commercial-Style Range Remote Indicator Light: Remote-Enabled Sabbath ModeKitchenAid Range "Sabbath Mode": Bake Stays On Sabbath, Sab, 5Ab, or 5A7KitchenAid Range Code Sabbath, Sab, 5Ab, or 5A7: Sabbath Mode is on Start Button BlinkingKitchenAid Range Message "Start Button Blinking": press Start to begin Start Button - Solid LightKitchenAid Range Message "Start Button - Solid Light": Sabbath Mode lighting Temp/Mod KnobKitchenAid Range Message "Temp/Mod Knob": solid white indicator lights

F3F3 questions

Is a plain F3 the same as F3 E1?

No. A plain F3 is listed as the oven control or its wiring. F3 E1 is listed as the oven temperature sensor, the control, or the wiring, so we read the whole display first.

Can a reset clear F3?

A reset can clear a one-time glitch, so try it once. If F3 comes back, a lasting control or wiring problem is more likely, and more resets will not fix it.

What will the visit cost?

We diagnose first, then give you a written price before any repair. If you approve the work, it is covered by our 30-day workmanship warranty.