KitchenAid Range Code F3 E0: oven temperature sensor or control

What F3 E0 means

Shown on KitchenAid freestanding and slide-in ranges, for instance the KFGG500ESS or KSEG700ESS, F3 E0 points to the oven temperature sensor, the control, or the wiring. The range cannot trust its oven temperature reading. You will see F3 E0 in the display, and an active bake or broil may be canceled, with preheating refusing to start until the code is cleared.

Common causes of F3 E0

The oven temperature sensor has drifted or failed
The electronic control cannot interpret what the sensor sends
Wiring to the sensor is loose or damaged

✓ One safe check you can try

1. Press Cancel and let the oven cool with the door open. 2. Remove any foil or liners touching the oven walls. 3. Shut off the breaker for sixty seconds and then restore power to the range. 4. Preheat to 350 degrees and watch for the code. 5. If F3 E0 returns, stop baking and call us.

! Why to stop there

The sensor and its wiring sit in a hot area behind the oven wall
Only a meter can tell a sensor problem from a control problem

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

Press Cancel to ResetKitchenAid Range Message "Press Cancel to Reset": Clear the Error Probe or Insert ProbeKitchenAid Range Display "Probe" or "Insert Probe": Meat Probe Needed PUSH or PSHKitchenAid Range Display "PUSH" or "PSH": Start Not Pressed Remote Indicator LightKitchenAid Commercial-Style Range Remote Indicator Light: Remote-Enabled Sabbath ModeKitchenAid Range "Sabbath Mode": Bake Stays On Sabbath, Sab, 5Ab, or 5A7KitchenAid Range Code Sabbath, Sab, 5Ab, or 5A7: Sabbath Mode is on Start Button BlinkingKitchenAid Range Message "Start Button Blinking": press Start to begin Start Button - Solid LightKitchenAid Range Message "Start Button - Solid Light": Sabbath Mode lighting

F3 E0F3 E0 questions

Does F3 E0 mean the oven is overheating?

The listing does not say so. It points to the oven temperature sensor, the control, or the wiring, which means the range cannot confirm the temperature rather than that the oven is too hot.

Can foil in the oven cause F3 E0?

Foil that covers the walls can interfere with heat and airflow, so remove it as a first step. The listed meaning still covers the sensor, control and wiring if the code returns.

How do you test the sensor?

A technician measures its response and checks the wiring and the control reading. You get the result and a written price before any repair begins.