Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent KitchenAid specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 903-2606 Schedule Service
Error code · Range

KitchenAid Range Message “Press Cancel to Reset”: Clear the Error

On KitchenAid freestanding and slide-in ranges such as the KFEG500ESS and KSGG700ESS, the message Press Cancel to Reset is shown when the control has detected a problem or error. Press the Cancel button or pad to…

Low risk · DIY check OK
Schedule Service(713) 903-2606
Code
Press Cancel to Reset
Appliance
Range
Brand
KitchenAid
Warranty
30-day workmanship

What Press Cancel to Reset means

On KitchenAid freestanding and slide-in ranges such as the KFEG500ESS and KSGG700ESS, the message Press Cancel to Reset is shown when the control has detected a problem or error. Press the Cancel button or pad to reset. If Call Service is displayed after pressing Cancel, reset power to the product by turning off the breaker and turning it back on.

Common causes of Press Cancel to Reset

  • An error detected by the control
  • A condition that returns as Call Service after Cancel
✓ One safe check you can try

1. Press Cancel. 2. If Call Service appears, switch the range off at the breaker for a minute. 3. Restore power and watch the display for a minute. 4. If the message comes back, stop using the oven and call us.

! Why to stop there
  • The message alone does not say which part reported the error.
  • A returning message needs real diagnosis.
  • We state our price in writing and back our work with 30 days of warranty.
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Range codes

White Blinking LightsKitchenAid Range Message "White Blinking Lights": oven waiting at Start WiFi Indicator LightKitchenAid Range Message "WiFi Indicator Light": connectivity status lamp Probe or Insert ProbeKitchenAid Range Display "Probe" or "Insert Probe": Meat Probe Needed PUSH or PSHKitchenAid Range Display "PUSH" or "PSH": Start Not Pressed Remote Indicator LightKitchenAid Commercial-Style Range Remote Indicator Light: Remote-Enabled Sabbath ModeKitchenAid Range "Sabbath Mode": Bake Stays On Sabbath, Sab, 5Ab, or 5A7KitchenAid Range Code Sabbath, Sab, 5Ab, or 5A7: Sabbath Mode is on Start Button BlinkingKitchenAid Range Message "Start Button Blinking": press Start to begin
Press Cancel to ResetPress Cancel to Reset questions
What do I press?

The Cancel button or pad. That resets the control after the message appears, and the display returns to normal if the condition has cleared. If not, the message returns and the range may need service.

What if Call Service shows after Cancel?

Reset power to the range at the breaker for a minute, then turn it on again. If Call Service returns, the range needs a technician.

Does the message tell me the problem?

Only that an error was detected. If it keeps returning, we find out which part reported it, and we give a written price before any repair, and a 30-day warranty on the work.

Book a visit

Still unsure about Press Cancel to Reset?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 903-2606
☎ Call the desk ▤ Schedule Service