KitchenAid Built-In Microwave Code F6 EA: Interface control sensed over-temperature

What F6 EA means

On KitchenAid built-in microwaves and combination microwave-wall ovens like the KMBP100ESS, F6 EA means the user interface control sensed an over-temperature condition, or the wiring to it has a problem. Heat near the display board prompts the unit to protect itself. The display shows F6 EA, and the unit may shut down until it cools. This is a protective stop, not a damaged display.

Common causes of F6 EA

Over-temperature condition detected at the user interface control
User interface control that is misreading temperature
Wiring to the interface control that is damaged or loose

✓ One safe check you can try

1. Press Cancel and leave the unit idle for 30 minutes to cool. 2. Make sure nothing blocks the vents or sits on top of the appliance. 3. Reset power at the breaker for one minute. 4. If F6 EA returns after cooling, stop using the unit and call.

! Why to stop there

Heat protection codes must not be bypassed by repeated restarts.
The cause could be real heat or a bad reading; only a technician can separate them safely.
You receive a written price first, and a 30-day workmanship warranty applies.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Microwave codes

Probe or Insert ProbeKitchenAid Combination Microwave Message "Probe" or "Insert Probe": Seat the meat probe in its jack PUSH or PSHKitchenAid Built-In Microwave Message PUSH or PSH: The oven is waiting for Start Registration ErrorKitchenAid Over-the-Range Microwave Message "Registration Error": Check the home network and try again Sabbath, Sab, 5Ab, or 5A6KitchenAid Built-In Microwave Display Sabbath, Sab, 5Ab or 5A6: Sabbath Mode is on SEKitchenAid Over-the-Range Microwave Code SE: Keypad or user interface problem F4 E8KitchenAid Combination Microwave Code F4 E8: Inverter or its wiring flagged F9 or F9E0KitchenAid Built-In Microwave Code F9 or F9E0: Check the electrical connection after installation Press Cancel to ResetKitchenAid Built-In Microwave Message "Press Cancel to Reset": Clear it, then reset power if Call Service shows

F6 EAF6 EA questions

Does F6 EA mean the unit is about to catch fire?

No, it is a protective response. Still, do not keep running the appliance with the code showing; let it cool and call if it returns.

Can poor ventilation cause it?

Blocked vents or items stored against the cabinet can add heat, so clear them. The listed meaning also includes the control and wiring, which a technician tests.

Will cooling fix it for good?

If the code does not return, the condition was temporary. A repeat after cooling points to a real repair need. Please do not cover the unit or block its ventilation while it cools.