KitchenAid Built-In Microwave Message "Feature Not Available": Try again or disable power as the display directs

What Feature Not Available means

On KitchenAid built-in microwaves and combination microwave-wall ovens such as the KMBP100ESS or KOCE500ESS, this message scrolls across the display while you are programming a cook cycle. The control wants you to follow the on-screen directions, either PRESS ENTER TO TRY AGAIN or DISABLE POWER TO CLEAR. It signals that the control could not accept the chosen setting. Treat it as a prompt first.

Common causes of Feature Not Available

Setting entered that the model does not support
Momentary control confusion while programming
Underlying problem in the control if the message repeats

✓ One safe check you can try

1. Follow the scrolling instructions and press Enter to try again. 2. If the display asks you to disable power, switch the breaker off for one minute and restore it. 3. Program the cycle again slowly, one step at a time. 4. If the message returns for every cycle, stop and call us.

! Why to stop there

A one-off message is normal and not worth a visit.
A message that comes back for each program may mean the control needs inspection.
We quote before work and keep you away from live boards.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Microwave codes

Probe or Insert ProbeKitchenAid Combination Microwave Message "Probe" or "Insert Probe": Seat the meat probe in its jack PUSH or PSHKitchenAid Built-In Microwave Message PUSH or PSH: The oven is waiting for Start Registration ErrorKitchenAid Over-the-Range Microwave Message "Registration Error": Check the home network and try again Sabbath, Sab, 5Ab, or 5A6KitchenAid Built-In Microwave Display Sabbath, Sab, 5Ab or 5A6: Sabbath Mode is on SEKitchenAid Over-the-Range Microwave Code SE: Keypad or user interface problem F6 E7KitchenAid Combination Microwave Code F6 E7: Manager board for the upper cavity FC E7KitchenAid Over-the-Range Microwave Code FC E7: Appliance did not join the router F6 E8KitchenAid Combination Microwave Code F6 E8: Manager control stopped responding

Feature Not AvailableFeature Not Available questions

Which instruction should I follow?

Do what the display scrolls. Trying again clears most one-time cases, while the disable-power wording asks for a breaker reset for about a minute. Do what the display scrolls on screen.

Does it mean the microwave is damaged?

Not by itself. It appears when a feature cannot be used during programming. A repeat on every cycle is what makes it a repair matter.

Will a technician find the cause quickly?

Usually yes. We watch the message appear, test the control and keypad, and give you a written price before any part is ordered. A repeat on every cycle is what justifies a visit.

KitchenAid Built-In Microwave Message “Feature Not Available”: Try again or disable power as the display directs

What Feature Not Available means

Common causes of Feature Not Available

Other Microwave codes

Still seeing Feature Not Available?