Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent KitchenAid specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 903-2606 Schedule Service
Error code · Dishwasher

KitchenAid Legacy Dishwasher: clean/Complete LED blinks 4 times, controls locked out

On legacy KitchenAid dishwashers from about 2008 to 2014, such as the KUDE60HXSS, KDTE104DSS and KDTE254ESS, the Clean/Complete LED blinking four times in a row with a pause between sets means an error was detected. The…

Medium · inspection needed
Schedule Service(713) 903-2606
Code
Clean/Complete LED blinks 4 times, pause, repeat
Appliance
Dishwasher
Brand
KitchenAid
Warranty
30-day workmanship

What Clean/Complete LED blinks 4 times, pause, repeat means

On legacy KitchenAid dishwashers from about 2008 to 2014, such as the KUDE60HXSS, KDTE104DSS and KDTE254ESS, the Clean/Complete LED blinking four times in a row with a pause between sets means an error was detected. The controls lock out and will not allow another cycle to start. You see the repeating group of four blinks and the dishwasher will not run.

Common causes of Clean/Complete LED blinks 4 times, pause, repeat

  • The control detected an error and locked out new cycles.
  • The cause is not named by this pattern.
  • An error remains after the power was cycled.
✓ One safe check you can try

1. Count four blinks in a row, then a pause. 2. Turn off power at the breaker for about a minute. 3. Restore power, close the door firmly and try a cycle. 4. Check that the filter and drain hose are not clogged. 5. If the blinking returns and controls stay locked, call us.

! Why to stop there
  • The pattern does not name a cause, so a diagnosis is required.
  • On older dishwashers, parts and wiring need careful testing.
  • Quoted in writing first, and every repair carries a 30-day guarantee.
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Dishwasher codes

F8E4KitchenAid Dishwasher Code F8E4: water in the base, drain sequence runs F8E5KitchenAid Dishwasher Code F8E5: the fill valve is stuck open F9E1KitchenAid Dishwasher Code F9E1: long drain, check filter and hose F9E2KitchenAid Dishwasher Code F9E2: drain motor error and clogs FAE4 or F10E4KitchenAid Dishwasher Code FAE4 or F10E4: diverter valve error FAE5 or F10E5KitchenAid Dishwasher Code FAE5 or F10E5: diverter leak, water under the dishwasher Front Status LightsKitchenAid Dishwasher Front Status Light Colors: what blue, red and white mean Front Status Lights Not IlluminatedKitchenAid Dishwasher Front Status Light Not Illuminated: no color during the cycle
Clean/Complete LED blinks 4 times, pause, repeatClean/Complete LED blinks 4 times, pause, repeat questions
What does four blinks mean?

On these older dishwashers, an error was detected and the controls locked out. The pattern does not say which part is responsible, so it has to be diagnosed.

Can I unlock it myself?

Cutting power at the breaker for a minute may clear it. If four blinks come back, the error is real and a technician should find it.

Is it worth repairing an older dishwasher?

Often, yes. We diagnose first and give a price in writing, so you can compare repair against replacement. Repairs have a 30-day warranty. We explain each finding before we proceed.

Book a visit

Still seeing Clean/Complete LED blinks 4 times, pause, repeat?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 903-2606
☎ Call the desk ▤ Schedule Service