KitchenAid Over-the-Range Microwave Code F6E0: Main appliance control board

What F6E0 means

On KitchenAid over-the-range microwave hood combinations such as the KMHS120ESS or KMHC319ESS, F6E0 signals a possible problem with the appliance control board or the wiring tied to it. The board is the main brain of the microwave. With F6E0 showing, buttons may stop responding and heating is blocked. The keypad may still beep or light up, yet the unit will not respond to commands or start a cycle, which is the usual way this code shows itself.

Common causes of F6E0

Appliance control board that has stopped working correctly
Loose or damaged wiring between the control board and other parts

✓ One safe check you can try

1. Press Cancel and see whether keys respond. 2. Unplug the microwave or turn the breaker off for a full minute and reconnect. 3. Try a quick cycle with a cup of water. 4. If F6E0 returns, stop using the microwave and call for service.

! Why to stop there

The control board is the most expensive electronic part in the unit, so it should be diagnosed, not guessed.
Taking the microwave off the wall bracket to reach the board is awkward and unsafe alone.
We quote in writing first and replace only what testing proves.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Microwave codes

PUSH or PSHKitchenAid Built-In Microwave Message PUSH or PSH: The oven is waiting for Start Registration ErrorKitchenAid Over-the-Range Microwave Message "Registration Error": Check the home network and try again Sabbath, Sab, 5Ab, or 5A6KitchenAid Built-In Microwave Display Sabbath, Sab, 5Ab or 5A6: Sabbath Mode is on SEKitchenAid Over-the-Range Microwave Code SE: Keypad or user interface problem Probe or Insert ProbeKitchenAid Combination Microwave Message "Probe" or "Insert Probe": Seat the meat probe in its jack F4E1KitchenAid Over-the-Range Microwave Code F4E1: Cavity thermistor circuit F9Q1KitchenAid Over-the-Range Microwave Code F9Q1: Touch pad and its wiring F4E4KitchenAid Over-the-Range Microwave Code F4E4: Humidity thermistor or its wiring

F6E0F6E0 questions

How is F6E0 different from F7?

Both mention the appliance control board in the listed meaning. They are distinct codes, so a technician starts from the one on your display and tests the board and its wiring.

Does the vent fan still work?

Sometimes, since fan and light run through other circuits. Do not depend on it, and call if you smell burning. It is wise to stay away from the cavity until a technician has tested the unit properly.

Is a reset useful?

A reset helps only if the code was a single glitch. When F6E0 repeats on the first try, the board or wiring needs checking. Our visit ends with a written quote for you.