KitchenAid Range Code 1d22: Oven sensor reading problem

What 1d22 means

The code 1d22 completes the 1d family on KitchenAid ranges with the same wording: a possible problem with the oven temperature sensor, the control, or the wiring. Owners notice the code with an oven that stops mid-bake or declines to start. No model is attached, so it can appear across the range line, and it stays on the display. It helps to write the exact code down before you phone.

Common causes of 1d22

Failing oven temperature sensor
Control misreading the sensor
Damaged or loose sensor wiring

✓ One safe check you can try

1. Press Cancel and open the door to cool the oven. 2. Check that the sensor probe at the back is not bent or touched by cookware. 3. Turn off the breaker for one minute, then restore it. 4. Run a short bake. 5. If 1d22 shows up again, stop and call us.

! Why to stop there

Sensor, control and wiring each need individual tests.
A bent probe is easy to damage further if you try to straighten it.
Our quote is written first and our repair has a 30-day warranty.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

White Blinking LightsKitchenAid Range Message "White Blinking Lights": oven waiting at Start WiFi Indicator LightKitchenAid Range Message "WiFi Indicator Light": connectivity status lamp Press Cancel to ResetKitchenAid Range Message "Press Cancel to Reset": Clear the Error Probe or Insert ProbeKitchenAid Range Display "Probe" or "Insert Probe": Meat Probe Needed PUSH or PSHKitchenAid Range Display "PUSH" or "PSH": Start Not Pressed Remote Indicator LightKitchenAid Commercial-Style Range Remote Indicator Light: Remote-Enabled Sabbath ModeKitchenAid Range "Sabbath Mode": Bake Stays On Sabbath, Sab, 5Ab, or 5A7KitchenAid Range Code Sabbath, Sab, 5Ab, or 5A7: Sabbath Mode is on

1d221d22 questions

Why does the oven stop mid-bake?

If the control cannot trust the sensor reading, it may shut the oven down. That fits the code's message about the sensor, control or wiring.

Is 1d22 the same as 1d11?

The wording is the same, so the same three areas are tested. The digits distinguish the entries, and one visit covers any of them that your range printed.

Should I try to straighten the sensor?

No. Bending it can make things worse and may break the wire inside. Let a technician check its position and its signal with the right meter.