KitchenAid Range Code F01: oven temperature sensor, control or wiring

What F01 means

On KitchenAid freestanding and slide-in ranges, including the KFEG500ESS and KSEG700ESS, F01 is listed as pointing to the oven temperature sensor, the control, or the wiring between them. The sensor is how the range knows how hot the oven cavity is. When the code shows, the display usually switches from the clock to F01, and baking or broiling may be canceled.

Common causes of F01

The oven temperature sensor is reading incorrectly or has failed
The electronic control is misreading the sensor signal
The wiring between sensor and control is loose or damaged

✓ One safe check you can try

1. Press Cancel and let the oven cool if it was hot. 2. Make sure no foil or liners cover the oven walls or the area near the sensor. 3. Switch the range off at the breaker for a minute, then restore power. 4. Try a short bake at 350 degrees. 5. If F01 comes back, stop baking and call us.

! Why to stop there

The sensor is inside the oven cavity and its wiring runs behind the range, away from safe reach
Without a meter, a bad sensor and a bad control look the same

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

White Blinking LightsKitchenAid Range Message "White Blinking Lights": oven waiting at Start WiFi Indicator LightKitchenAid Range Message "WiFi Indicator Light": connectivity status lamp Press Cancel to ResetKitchenAid Range Message "Press Cancel to Reset": Clear the Error Probe or Insert ProbeKitchenAid Range Display "Probe" or "Insert Probe": Meat Probe Needed PUSH or PSHKitchenAid Range Display "PUSH" or "PSH": Start Not Pressed Remote Indicator LightKitchenAid Commercial-Style Range Remote Indicator Light: Remote-Enabled Sabbath ModeKitchenAid Range "Sabbath Mode": Bake Stays On Sabbath, Sab, 5Ab, or 5A7KitchenAid Range Code Sabbath, Sab, 5Ab, or 5A7: Sabbath Mode is on

F01F01 questions

What is the oven temperature sensor on my range?

It is the probe in the oven cavity that tells the control how hot the oven is. F01 points to that sensor, the control reading it, or the wiring between them.

Can I keep using the stovetop with F01 showing?

The code is about the oven, so burners and cooktop elements may still work. Use the oven only after the code clears. If it keeps returning, have us look before relying on the oven.

Why does F01 sometimes disappear after a reset?

A power reset can clear a one-time glitch. If the sensor or wiring is actually failing, the code returns, often on the next preheat, and that is when a test visit makes sense.