KitchenAid Range Code F03: electronic oven control or wiring

What F03 means

On KitchenAid freestanding and slide-in ranges, for example the KFEG500ESS or KSGG700ESS, F03 points to the electronic oven control or the wiring connected to it. This is the circuit board that runs the oven functions, so the code reports a problem close to the brain of the range. You will see F03 on the display, and the oven may not heat or respond to its pads.

Common causes of F03

The electronic oven control has an internal problem
Wiring to the control is loose, burned or damaged

✓ One safe check you can try

1. Press Cancel and look at the display. 2. Turn the range off at its breaker for a full minute, then switch it back on. 3. Set the clock and see whether the pads respond. 4. If you ever notice a gas smell on a gas or dual-fuel model, go outside and phone the gas utility. 5. If F03 returns, stop using the oven.

! Why to stop there

The control and its harness are behind the glass panel near live parts
A control replacement is a significant cost, so the wiring must be ruled out first

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

Sabbath ModeKitchenAid Range "Sabbath Mode": Bake Stays On Sabbath, Sab, 5Ab, or 5A7KitchenAid Range Code Sabbath, Sab, 5Ab, or 5A7: Sabbath Mode is on Start Button BlinkingKitchenAid Range Message "Start Button Blinking": press Start to begin Start Button - Solid LightKitchenAid Range Message "Start Button - Solid Light": Sabbath Mode lighting Temp/Mod KnobKitchenAid Range Message "Temp/Mod Knob": solid white indicator lights Understanding Tones or BeepsKitchenAid Range Message "Understanding Tones or Beeps": when the range sounds White Blinking LightsKitchenAid Range Message "White Blinking Lights": oven waiting at Start WiFi Indicator LightKitchenAid Range Message "WiFi Indicator Light": connectivity status lamp

F03F03 questions

What does the electronic oven control do?

It is the board that reads the pads, watches the sensors and switches the oven functions. F03 means that board or the wiring serving it needs attention.

Can a power reset fix F03?

Occasionally, if the code came from a passing disturbance. If it returns after one reset, repeated resets will not help, and the control or wiring should be tested.

How soon should I call?

Soon, but there is no emergency unless you smell gas. Stop using the oven if F03 returns, and call us. We will test first and quote the price before any work.