KitchenAid Older Range Code F1-C: oven door latch or switch

What F1-C means

Shown on older KitchenAid ranges with hyphen-format electronic oven control codes, F1-C points to the oven door latch, the door lock switch, or the wiring tied to them. It is the second latch code in this style. The display reads F1-C where the clock sits, and a bake or clean cycle may not begin because the control cannot confirm the door state.

Common causes of F1-C

The oven door latch is worn or catching
The door lock switch is not signaling correctly
The latch wiring has a poor connection

✓ One safe check you can try

1. Press Cancel and let the oven cool. 2. Check the door gasket for anything caught in the seal. 3. Close the door gently but firmly and listen for the latch. 4. Switch the range off at its breaker for one minute and back on. 5. If F1-C returns, stop using the oven and call us.

! Why to stop there

The latch mechanism is built into the oven body, away from safe reach
Replacing a latch correctly means checking the switch and wiring, too

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

PUSH or PSHKitchenAid Range Display "PUSH" or "PSH": Start Not Pressed Remote Indicator LightKitchenAid Commercial-Style Range Remote Indicator Light: Remote-Enabled Sabbath ModeKitchenAid Range "Sabbath Mode": Bake Stays On Sabbath, Sab, 5Ab, or 5A7KitchenAid Range Code Sabbath, Sab, 5Ab, or 5A7: Sabbath Mode is on Start Button BlinkingKitchenAid Range Message "Start Button Blinking": press Start to begin Start Button - Solid LightKitchenAid Range Message "Start Button - Solid Light": Sabbath Mode lighting Temp/Mod KnobKitchenAid Range Message "Temp/Mod Knob": solid white indicator lights Understanding Tones or BeepsKitchenAid Range Message "Understanding Tones or Beeps": when the range sounds

F1-CF1-C questions

What does the lock switch do?

It tells the control whether the door is locked or unlocked. F1-C points to the latch, that switch, or the wiring, so the control may not trust the door position.

Will a power reset unlock my oven door?

A reset can release a latch that is confused, but only when the oven is cool. If the door stays locked or F1-C returns, stop and call. Never pry at a locked door.

How much does a latch repair cost?

We test first and give a written price before starting. Latch work is generally less costly than control work, and the repair is covered by our 30-day workmanship warranty.