KitchenAid Range Code F1 E2: oven control and wiring check

What F1 E2 means

On KitchenAid freestanding and slide-in ranges, among them the KFEG500ESS and KSGG700ESS, F1 E2 is another oven control code. It points to the control, or to the wiring that connects it. The display shows F1 E2 in place of the time of day, and the oven may stop mid-cycle. We log it alongside its neighbors in the F1 group, yet each reading is recorded separately.

Common causes of F1 E2

The oven control has developed a problem
A wire or connector serving the control is loose or damaged

✓ One safe check you can try

1. Press Cancel and read the full code. 2. Turn the range off at its breaker for one minute, then back on. 3. Set the clock and try a brief bake. 4. If the code appears during preheat, write that down for us. 5. When F1 E2 returns after a reset, stop using the oven and call us rather than resetting again and again.

! Why to stop there

The oven control sits in a part of the range that is live whenever power is on
Several different problems can look alike on the display, so measurements come before any new part

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

Sabbath, Sab, 5Ab, or 5A7KitchenAid Range Code Sabbath, Sab, 5Ab, or 5A7: Sabbath Mode is on Start Button BlinkingKitchenAid Range Message "Start Button Blinking": press Start to begin Start Button - Solid LightKitchenAid Range Message "Start Button - Solid Light": Sabbath Mode lighting Temp/Mod KnobKitchenAid Range Message "Temp/Mod Knob": solid white indicator lights Understanding Tones or BeepsKitchenAid Range Message "Understanding Tones or Beeps": when the range sounds White Blinking LightsKitchenAid Range Message "White Blinking Lights": oven waiting at Start WiFi Indicator LightKitchenAid Range Message "WiFi Indicator Light": connectivity status lamp Press Cancel to ResetKitchenAid Range Message "Press Cancel to Reset": Clear the Error

F1 E2F1 E2 questions

Why do F1 E0, E1 and E2 all talk about the control?

They are separate readings in the same group, each pointing to the oven control or its wiring. We note which one you see so our first checks start in the right place.

How long does an F1 E2 repair take?

Testing is usually done during the first visit. If a part is needed and we do not have it on the truck, we will tell you before ordering and quote the price in writing.

Should I turn the breaker off while waiting for the repair?

If the range is acting oddly, yes, that is a safe way to rest it. Leave the breaker off until we arrive, and keep an eye out for any gas smell on gas models.