KitchenAid Range Code F1 E5: oven control or wiring

What F1 E5 means

The KitchenAid freestanding and slide-in ranges, such as the KFGG500ESS and KSEG700ESS, may display F1 E5 when the oven control or its wiring needs attention. The display shows F1 E5 where the clock normally appears, and the keypad may seem to ignore your presses. Because the control manages every oven function, bake, broil and self-clean may all be unavailable until the code is dealt with.

Common causes of F1 E5

The oven control is reporting an internal problem
Wiring to the control is damaged or poorly connected

✓ One safe check you can try

1. Press Cancel and wait a few seconds. 2. Switch the range off at the breaker for a full minute. 3. Turn the power back on and set the clock. 4. Run a short bake to see whether the oven heats. 5. If you smell gas on a gas model, go outdoors and call the gas utility. 6. If F1 E5 returns, stop and call us.

! Why to stop there

The control panel hides line-voltage wiring that owners should not touch
Ordering a control without testing the harness can cost you twice

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

Press Cancel to ResetKitchenAid Range Message "Press Cancel to Reset": Clear the Error Probe or Insert ProbeKitchenAid Range Display "Probe" or "Insert Probe": Meat Probe Needed PUSH or PSHKitchenAid Range Display "PUSH" or "PSH": Start Not Pressed Remote Indicator LightKitchenAid Commercial-Style Range Remote Indicator Light: Remote-Enabled Sabbath ModeKitchenAid Range "Sabbath Mode": Bake Stays On Sabbath, Sab, 5Ab, or 5A7KitchenAid Range Code Sabbath, Sab, 5Ab, or 5A7: Sabbath Mode is on Start Button BlinkingKitchenAid Range Message "Start Button Blinking": press Start to begin Start Button - Solid LightKitchenAid Range Message "Start Button - Solid Light": Sabbath Mode lighting

F1 E5F1 E5 questions

What is different about F1 E5?

The meaning is the same group as the other F1 codes, the oven control or its wiring. The E5 suffix is a reading we record, and it helps us decide where to begin.

Will resetting the breaker erase anything important?

It clears the clock and timers only. Your cooking programs on most ranges are simple to set again, so a reset is a low-risk first step.

Is F1 E5 an emergency?

Not by itself. Just stop using the oven once it repeats. If there is any smell of gas, that changes the situation: leave the house and call the gas utility from outside.