KitchenAid Range Code F1 E7: appliance control board or wiring

What F1 E7 means

On KitchenAid freestanding and slide-in ranges, for instance the KFEG500ESS or KFGG500ESS, F1 E7 points to the appliance control board, or the wiring that connects it. Unlike the other F1 readings that name the oven control, this one names the appliance control board. It takes the place of the clock on the display, and oven functions may be unavailable while it is showing.

Common causes of F1 E7

The appliance control board has developed a problem
Wiring to the board is loose or damaged

✓ One safe check you can try

1. Press Cancel and read the full display. 2. Interrupt power at the breaker for a minute, then restore it. 3. Set the clock and try a short bake or a burner. 4. Do not remove any rear or control panels. 5. If F1 E7 comes back, stop using the range and call us with the display text.

! Why to stop there

The board is deep in the range and energized, which makes it unsafe for owners to reach
A board swap is expensive, so we verify the wiring and power feed first

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

Probe or Insert ProbeKitchenAid Range Display "Probe" or "Insert Probe": Meat Probe Needed PUSH or PSHKitchenAid Range Display "PUSH" or "PSH": Start Not Pressed Remote Indicator LightKitchenAid Commercial-Style Range Remote Indicator Light: Remote-Enabled Sabbath ModeKitchenAid Range "Sabbath Mode": Bake Stays On Sabbath, Sab, 5Ab, or 5A7KitchenAid Range Code Sabbath, Sab, 5Ab, or 5A7: Sabbath Mode is on Start Button BlinkingKitchenAid Range Message "Start Button Blinking": press Start to begin Start Button - Solid LightKitchenAid Range Message "Start Button - Solid Light": Sabbath Mode lighting Temp/Mod KnobKitchenAid Range Message "Temp/Mod Knob": solid white indicator lights

F1 E7F1 E7 questions

Is F1 E7 about the same part as F1 E1?

Not exactly. F1 E1 points to the oven control, while F1 E7 names the appliance control board and its wiring. The checks start in a different place for each.

Will F1 E7 stop my burners too?

It can, depending on how the model uses the board. Test a burner once after a reset. If the burners or oven act strangely, stop and call, since the board feeds more than one function.

How is the repair handled?

We test the board's wiring and supply before suggesting a replacement, then give you a written price. If you approve, the repair is covered by our 30-day workmanship warranty.