KitchenAid Range Code F2 E6: pad panel, control or wiring

What F2 E6 means

Seen on KitchenAid freestanding and slide-in ranges like the KFGS530ESS or KSGG700ESS, F2 E6 closes out the keypad group: the user interface or keypad, the control, or the wiring is flagged. The display reads F2 E6, and the pads may be slow, sticky or dead. Without a dependable pad panel, the oven cannot take your cooking instructions, and a technician starts the test there.

Common causes of F2 E6

The user interface or keypad is worn or failing
The control is misreading the keypad
The wiring is loose or damaged

✓ One safe check you can try

1. Press Cancel and look at what the display shows next. 2. Dry and wipe the panel with a soft cloth. 3. Switch off at the breaker for a minute and restore power. 4. Try a few pads one at a time. 5. If F2 E6 returns after the reset, stop using the oven and call us.

! Why to stop there

The pad panel is attached to the control through live wiring
Telling a bad panel from a bad board requires measurements

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

Press Cancel to ResetKitchenAid Range Message "Press Cancel to Reset": Clear the Error Probe or Insert ProbeKitchenAid Range Display "Probe" or "Insert Probe": Meat Probe Needed PUSH or PSHKitchenAid Range Display "PUSH" or "PSH": Start Not Pressed Remote Indicator LightKitchenAid Commercial-Style Range Remote Indicator Light: Remote-Enabled Sabbath ModeKitchenAid Range "Sabbath Mode": Bake Stays On Sabbath, Sab, 5Ab, or 5A7KitchenAid Range Code Sabbath, Sab, 5Ab, or 5A7: Sabbath Mode is on Start Button BlinkingKitchenAid Range Message "Start Button Blinking": press Start to begin Start Button - Solid LightKitchenAid Range Message "Start Button - Solid Light": Sabbath Mode lighting

F2 E6F2 E6 questions

Why is F2 E6 listed with the keypad?

Its listed meaning is the user interface or keypad, the control, or the wiring. The pads are the part owners touch, so they are the first suspect on our list.

Does a reset hurt anything on an older range?

No. A breaker reset only clears the clock and timers. It is a safe first step for F2 E6, and it either clears a one-time glitch or shows the code is real.

What is your repair warranty?

Repairs we perform carry a 30-day workmanship warranty, and we give a written price before starting. If the code returns within that period because of our work, we come back.