KitchenAid Range Code F3 E4: check the meat probe is seated

What F3 E4 means

On KitchenAid freestanding and slide-in ranges, such as the KFEG500ESS or KSEG700ESS, F3 E4 is answered by verifying that the meat probe is securely inserted in its receptacle, whose location varies by model. After that, the listed steps are a power reset and then watching the oven for one minute to see that the code does not return. The probe plug is the part you can reach without any tools.

Common causes of F3 E4

The meat probe is not seated securely in its receptacle
The probe or its connection is not being read by the control
A one-time condition that a power reset clears

✓ One safe check you can try

1. Remove the meat probe and look at the plug for food residue. 2. Push the probe firmly into its receptacle again. 3. Switch off the range at its breaker for a minute and restore power. 4. Watch the oven for one minute to confirm the code does not return. 5. Try a short bake. 6. If F3 E4 comes back, call us.

! Why to stop there

The probe receptacle is wired into the oven cavity
If reseating does not help, the probe or its connection has to be tested

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

Press Cancel to ResetKitchenAid Range Message "Press Cancel to Reset": Clear the Error Probe or Insert ProbeKitchenAid Range Display "Probe" or "Insert Probe": Meat Probe Needed PUSH or PSHKitchenAid Range Display "PUSH" or "PSH": Start Not Pressed Remote Indicator LightKitchenAid Commercial-Style Range Remote Indicator Light: Remote-Enabled Sabbath ModeKitchenAid Range "Sabbath Mode": Bake Stays On Sabbath, Sab, 5Ab, or 5A7KitchenAid Range Code Sabbath, Sab, 5Ab, or 5A7: Sabbath Mode is on Start Button BlinkingKitchenAid Range Message "Start Button Blinking": press Start to begin Start Button - Solid LightKitchenAid Range Message "Start Button - Solid Light": Sabbath Mode lighting

F3 E4F3 E4 questions

What should I check first when F3 E4 appears?

Check that the meat probe is securely inserted in its receptacle. Its location varies by model. Then reset power and watch the oven for one minute to see whether the code stays away.

Do I need a probe to get F3 E4?

The listed steps center on the meat probe, so a loose probe is the obvious suspect. If you do not use one, still follow the power reset and call us if the code returns.

Is a bad probe an expensive repair?

Usually it costs less than control work, but we confirm the cause first. You get a written price before any work starts, with a 30-day workmanship warranty on our repair.