KitchenAid Range Code F5 E2: door latch assembly, switch and wiring

What F5 E2 means

On KitchenAid freestanding and slide-in ranges, for example the KFGG500ESS or KSEG700ESS, F5 E2 is another main oven door reading. It points to the main oven door latch assembly, the door switch, or the wiring. When it appears, the display shows F5 E2 in place of the clock, and the control may not accept a bake or clean command until the door state is confirmed.

Common causes of F5 E2

The main oven door latch assembly is not working freely
The door switch fails to report a closed door
Wiring to either part has a poor connection

✓ One safe check you can try

1. Press Cancel and wait until the oven is cool. 2. Close the door fully and check that nothing prevents it from seating. 3. Reset the range by turning its breaker off for a minute and on again. 4. Try a short bake. 5. Gas range: leave the house and call the gas utility from outside if you smell gas. 6. Should F5 E2 show again, call us before using the oven.

! Why to stop there

Working on a latch requires reaching behind the oven door frame
Latch, switch and wiring problems share one code, so testing is needed

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

Press Cancel to ResetKitchenAid Range Message "Press Cancel to Reset": Clear the Error Probe or Insert ProbeKitchenAid Range Display "Probe" or "Insert Probe": Meat Probe Needed PUSH or PSHKitchenAid Range Display "PUSH" or "PSH": Start Not Pressed Remote Indicator LightKitchenAid Commercial-Style Range Remote Indicator Light: Remote-Enabled Sabbath ModeKitchenAid Range "Sabbath Mode": Bake Stays On Sabbath, Sab, 5Ab, or 5A7KitchenAid Range Code Sabbath, Sab, 5Ab, or 5A7: Sabbath Mode is on Start Button BlinkingKitchenAid Range Message "Start Button Blinking": press Start to begin Start Button - Solid LightKitchenAid Range Message "Start Button - Solid Light": Sabbath Mode lighting

F5 E2F5 E2 questions

Can F5 E2 clear after I clean the door seal?

Sometimes grime in the seal stops the door from seating and tripping the switch. Wipe the seal gently when the oven is cool. If F5 E2 returns, the latch, switch or wiring needs a test.

Is F5 E2 worse than F5 E1?

Both carry the same listed meaning: the main oven door latch assembly, the door switch or the wiring. They are separate readings and neither is more serious. We start with the latch assembly either way.

How is the final price decided?

After testing, we tell you which part needs work and give a written price before we start. Approved repairs carry a 30-day workmanship warranty, so you know what to expect.