KitchenAid Range Code F6 E3: wiring to the appliance manager needs checking

What F6 E3 means

F6 E3 appears on KitchenAid freestanding and slide-in ranges, for example the KFEG500ESS or KFGG500ESS, when there may be a problem with the appliance manager or its associated wiring. It carries the same meaning as F6 E1, so the work centers on the appliance manager and the connections around it. The display shows the code, and normal oven operation may stop until the control is cleared.

Common causes of F6 E3

The appliance manager
Wiring linked to the appliance manager

✓ One safe check you can try

1. Press Cancel once. 2. Turn the breaker for the range off for a minute and back on. 3. Let the display sit for a minute and see whether F6 E3 stays gone. 4. If it returns, do not keep cycling the breaker. Leave the oven unused until we visit.

! Why to stop there

The appliance manager sits inside the range, out of reach for owners.
Loose or damaged wiring can only be confirmed with proper tools.
The price comes in writing first, and we back work with 30 days of warranty.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

Press Cancel to ResetKitchenAid Range Message "Press Cancel to Reset": Clear the Error Probe or Insert ProbeKitchenAid Range Display "Probe" or "Insert Probe": Meat Probe Needed PUSH or PSHKitchenAid Range Display "PUSH" or "PSH": Start Not Pressed Remote Indicator LightKitchenAid Commercial-Style Range Remote Indicator Light: Remote-Enabled Sabbath ModeKitchenAid Range "Sabbath Mode": Bake Stays On Sabbath, Sab, 5Ab, or 5A7KitchenAid Range Code Sabbath, Sab, 5Ab, or 5A7: Sabbath Mode is on Start Button BlinkingKitchenAid Range Message "Start Button Blinking": press Start to begin Start Button - Solid LightKitchenAid Range Message "Start Button - Solid Light": Sabbath Mode lighting

F6 E3F6 E3 questions

Why do F6 E1 and F6 E3 sound alike?

Both point to the appliance manager or its wiring. Which one appears is the control's way of reporting where it noticed the problem, and the repair visit covers the same parts either way.

Can I run the oven after a reset?

If the code stays away, the oven may run, but a code that returns means you should stop using it until it is checked. Running a range with a control problem can cause a worse failure.

Is F6 E3 dangerous?

It concerns control electronics. Tampering is not advised; a power reset from the breaker is the only step we suggest at home. We test the wiring safely during the visit.