KitchenAid KDFE104D Dishwasher Repair
Leaks that show up only during the drain portion of the cycle are a typical story for the KDFE104D, and they usually come from the hose connection or its clip rather than from the tub. A plate reading KDFE104DBL or KDFE104DSS describes the same appliance.
We slide the dishwasher forward when access allows and follow the drain hose from the pump to the disposer or air gap, looking for a loose clip, a soft hose end or a kink behind the unit. We then check for scale in the sump and on the heater, and test both racks for even spray. If the pump hums without clearing the tub, we look for a jam before condemning it. We give you a written price before we start.
Most likely the drain hose or its clamp, because that joint is under pressure only while the pump runs. We inspect the hose end, the clip and the connection at the disposer.
Over time, yes. Scale on the heater and in the spray holes reduces heating and washing. We check both and explain how often a descaling cycle makes sense for your water.
Stop the cycle. A humming pump that cannot move water may be jammed, and running it can overheat the motor. We clear the sump and test the pump free of the jam.
Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.
