KitchenAid KDFE304R Third Level Jet Rack Dishwasher Service
The KDFE304R is a dishwasher with a third level jet rack and a PrintShield finish, also found as the KDFE304RBS and KDFE304RPS. The extra jets feed the top level, so a clog there shows up quickly as dirty utensils.
We start by removing the arms and rinsing every jet we can reach, then check the filter and sump. The inlet valve and latch follow if the tub fills wrongly or the cycle will not start.
You receive a written price first, and our work comes with a 30-day workmanship warranty. A front panel with a jet rack also has more plumbing behind it than a basic rack, so we trace every hose and clamp during a cycle and watch for weeping at the fittings. Anything that drips only under pressure shows up this way. Before leaving, we run a short wash so you can see the jets working.
More often the jets feeding that level are clogged or the arm is stiff. We clean and test them first, then look at the filter and water pressure.
The latch switch may not be reporting a closed door. We test the switch and latch alignment before looking at the control. Poor seating of the door can also keep the latch from closing the circuit.
You may see too little water, or water that keeps coming. We watch the fill with the door slightly open and test the valve with a meter.
Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.
