Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent KitchenAid specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 903-2606 Schedule Service
Model library · KitchenAid Dishwasher

KDTE554C

KitchenAid KDTE554C Dishwasher Service

Schedule Service(713) 903-2606
KitchenAid dishwasher

Most common issues on this model

  1. Upper arm getting almost no water
  2. Pump hum with no discharge
  3. Rumble from the motor area during the main wash
  4. Intermittent no-start tied to how firmly the door is closed

The KDTE554C is sold in stainless as the KDTE554CSS, and it is one of those dishwashers where a half-clean load makes it obvious something is off. One rack shining and the other hazy means water is going to the wrong place.

We run a test cycle and look at how water reaches each arm, then examine the diverter and arm seals. If the pump hums but the tub holds water, we clear the sump and turn the impeller by hand, and we listen to the wash motor for a bearing whine. The latch is last on the list: a door that does not register stops the cycle before it starts. You will have our written price before any work begins.

Key features

  • Dishwasher
  • Also sold as KDTE554CSS
→Codes

Error codes this model can show

F8E5KitchenAid Dishwasher Code F8E5: the fill valve is stuck open F9E1KitchenAid Dishwasher Code F9E1: long drain, check filter and hose F9E2KitchenAid Dishwasher Code F9E2: drain motor error and clogs FAE4 or F10E4KitchenAid Dishwasher Code FAE4 or F10E4: diverter valve error FAE5 or F10E5KitchenAid Dishwasher Code FAE5 or F10E5: diverter leak, water under the dishwasher Front Status LightsKitchenAid Dishwasher Front Status Light Colors: what blue, red and white mean Front Status Lights Not IlluminatedKitchenAid Dishwasher Front Status Light Not Illuminated: no color during the cycle Glowing RedKitchenAid Dishwasher Sani Rinse Glowing Red: end-of-Cycle sanitize indicator
KDTE554CKDTE554C questions
Why does only one rack get washed in my KDTE554C?

The diverter or an arm seal is sending water to the wrong place. We watch the spray with both racks in and test the diverter motion.

The pump hums yet the tub is full. Can you save the pump?

Often. A jammed impeller causes that hum. We clear the sump and test rotation, so we only replace the pump if it will not turn.

Is the stainless model repaired differently?

The internal repairs are the same as other finishes. Door panel parts differ, so we match them to the plate number. Door panel parts are matched to the plate, so the finish never causes a delay.

Book a visit

Book repair for your KDTE554C

Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.

(713) 903-2606
☎ Call the desk ▤ Schedule Service