KitchenAid KECS100G Cooktop Repair
The KECS100G is sold as KECS100GBL and KECS100GSS, and the call we get most is a flame that dies when you turn it down to simmer. The gas valve has to hold a tiny opening, and an old valve struggles. We clean the burner, then test the valve; if you smell gas, leave the house and call the gas utility from outside.
Underneath, wiring has been through many heat cycles. Brittle insulation and loose lugs can make a zone unreliable, so we check them with the cooktop lifted. Knob shafts that have worn leave the setting mark pointing at the wrong place.
A zone that switches off by itself tells us to test the limiter under the glass. You will have the price in writing before work starts, and a 30-day warranty protects the repair.
If it happens on low every time, the valve is suspect. After cleaning the burner, we test the valve at its smallest opening. A gas smell means leaving and calling the utility at once.
Yes, on older cooktops. Heat cycling stiffens insulation and loosens terminals. We lift the unit, inspect each wire end, and repair only what shows damage.
The knob may be slipping on its shaft, or the switch behind it has failed. We test both by hand and with a meter, and replace only the failed part.
Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.
