KitchenAid KFGS306V Cooktop Service
Look at the rating plate on a KFGS306V and you may find a code such as KFGS306VSS00 up to KFGS306VSS04. Those are revisions of the same base model, and the KFGS306VSS version is the one we see most often listed under it. We read the full plate before ordering anything so the part matches your revision.
On these units the first thing we want to see is the flame itself. A burner that lifts, turns yellow or goes out at a low setting tells us whether the trouble is a cap that is not seated, a clogged port or a valve that is no longer holding its position. We also check the knobs, since a worn shaft can make a good control look bad.
At any gas smell, leave the house and phone the gas utility from outside before you phone us. For everything else, you get a written price first, and a 30-day warranty on our workmanship.
Look at the rating plate for a code that starts with KFGS306VSS, followed by two digits from 00 to 04. Give us that full code when you call, and we order parts for your exact revision rather than the base model alone.
Usually a burner cap is sitting a little off its base, or the ports under it are partly blocked. We reseat and clean the burner first, then check the valve if the flame still lifts or turns yellow.
Yes. A loose knob often means a worn shaft behind it. We test the control with the knob removed, so we replace the part that is actually worn instead of guessing between the two.
Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.
