KitchenAid KGRS303B Gas Range Repair
A KGRS303B, labeled KGRS303BSS0 on one recorded plate, is a gas range whose oven and burners both depend on healthy ignition. When that ignition weakens, you notice it as a slow oven, a burner that ticks, or a flame that comes and goes.
We start with the oven igniter. It can glow orange and still not pull enough current for the valve, so we measure the draw. At the cooktop, we clean the igniter tips and ports and listen for the spark pattern. If the flame will not stay steady, the valve and switch behind the knob are tested. A sensor that has drifted is checked against a thermometer in the cavity. Whenever there is a smell of gas, stop, step outside and call the gas utility. We quote in writing first and cover our work with a 30-day warranty.
A weakened igniter is the first suspect, since it opens the gas valve slowly or not at all. We measure its current draw and replace it if it is below spec.
It is a revision code on the rating plate, and the full code on record is KGRS303BSS0. We use it to match boards, sensors and igniters to your range precisely, because small production changes can make look-alike parts incompatible.
Turn the knob off and ventilate. Dirt or moisture at the igniter is the common cause, and we clean and test it. If you smell gas, leave and call the utility from outside.
Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.
