Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent KitchenAid specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 903-2606 Schedule Service
Model library · KitchenAid Range

KGRS308B

KitchenAid KGRS308B Gas Range Repair

Schedule Service(713) 903-2606
KitchenAid range

Most common issues on this model

  1. Oven that overshoots its setting because the probe reads low
  2. An oven that stays cold while the igniter glows, from low current draw
  3. A burner that ticks away and never catches, with food residue at the igniter
  4. Door seal wear that lets heat out the front of the oven

The KGRS308B, sold also as the KGRS308BSS, tends to reach us with a two-part complaint: the oven is slow and a burner is fussy. Both come back to ignition, which is why we treat them in one visit.

In the oven, we measure the igniter current rather than judging by the glow, and we compare the cavity temperature with the display to see whether the sensor has drifted. On the cooktop, we clean the burner heads and igniter tips and run the spark test. The door gasket is checked for contact, because a leak makes even a healthy oven struggle. Revision codes BSS0 and BSS1 are on record, and they guide our part choice. In case of a gas odor, evacuate the house and call the gas utility from outside. A written price comes first, and a 30-day warranty follows.

Key features

  • KitchenAid KGRS308B gas range
  • Stainless version sold as KGRS308BSS
  • Revision codes on file include KGRS308BSS0, KGRS308BSS1
→Codes

Error codes this model can show

Press Cancel to ResetKitchenAid Range Message "Press Cancel to Reset": Clear the Error Probe or Insert ProbeKitchenAid Range Display "Probe" or "Insert Probe": Meat Probe Needed PUSH or PSHKitchenAid Range Display "PUSH" or "PSH": Start Not Pressed Remote Indicator LightKitchenAid Commercial-Style Range Remote Indicator Light: Remote-Enabled Sabbath ModeKitchenAid Range "Sabbath Mode": Bake Stays On Sabbath, Sab, 5Ab, or 5A7KitchenAid Range Code Sabbath, Sab, 5Ab, or 5A7: Sabbath Mode is on Start Button BlinkingKitchenAid Range Message "Start Button Blinking": press Start to begin Start Button - Solid LightKitchenAid Range Message "Start Button - Solid Light": Sabbath Mode lighting
KGRS308BKGRS308B questions
My KGRS308B oven runs 30 degrees hot. Can that be fixed?

Yes. We compare the display to a thermometer, then test the sensor. If it has drifted we replace it, and we check the gasket too.

Why is a KGRS308B burner hard to light on humid days?

Moisture at the igniter tip lets the spark leak away before it can light the gas, which is why humid days are worse. We clean and dry the igniter and tip, then replace it if it keeps misfiring after that.

Does the KGRS308BSS differ from the KGRS308B?

It is the stainless version of the same range, so repair is identical and the igniter, sensor and gasket are shared. The rating plate codes BSS0 and BSS1 tell us the revision, and we use them when ordering parts.

Book a visit

Book repair for your KGRS308B

Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.

(713) 903-2606
☎ Call the desk ▤ Schedule Service