Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent KitchenAid specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 903-2606 Schedule Service
Model library · KitchenAid Dishwasher

KUDC03IV

KitchenAid KUDC03IV Full Console Dishwasher Repair

Schedule Service(713) 903-2606
KitchenAid dishwasher

Most common issues on this model

  1. Wash sensor reading dirty or failing, giving wrong cycle lengths
  2. Food particles caught in the sump, giving a sour smell
  3. Fill problems traced to a worn inlet valve
  4. Door latch or seal wear causing a no-start or a leak

The KUDC03IV is a full console dishwasher with 3 wash cycles, 3 options and room for 14 place settings. The Optimum Wash sensor lets it judge the load, and it is also sold as the KUDC03IVBL0, KUDC03IVBS0 and KUDC03IVWH0.

When a sensor machine runs oddly, it can mean the sensor is dirty or misreading, not that the board has failed. We clean and test it before anything else, then look at the filter, sump and fill.

Because a full console model puts its controls on the top edge of the door, we also check that the door wiring is not worn. Our written price comes first, and each repair has a 30-day workmanship warranty. Having the plate number ready speeds things up.

Key features

  • Full console dishwasher
  • Three wash cycles, three options
  • 14 place settings
  • Optimum Wash sensor
  • Variants: KUDC03IVBL0, KUDC03IVBS0, KUDC03IVWH0
→Codes

Error codes this model can show

F9E2KitchenAid Dishwasher Code F9E2: drain motor error and clogs FAE4 or F10E4KitchenAid Dishwasher Code FAE4 or F10E4: diverter valve error FAE5 or F10E5KitchenAid Dishwasher Code FAE5 or F10E5: diverter leak, water under the dishwasher Front Status LightsKitchenAid Dishwasher Front Status Light Colors: what blue, red and white mean Front Status Lights Not IlluminatedKitchenAid Dishwasher Front Status Light Not Illuminated: no color during the cycle Glowing RedKitchenAid Dishwasher Sani Rinse Glowing Red: end-of-Cycle sanitize indicator H2OKitchenAid Dishwasher Display H2O: water not detected during fill Sanitize Light FlashingKitchenAid Dishwasher Sanitize Light Flashing: sanitization temperature not met
KUDC03IVKUDC03IV questions
My KUDC03IV runs a very short or very long cycle. Why?

The Optimum Wash sensor may be dirty or giving a wrong reading. We clean it, test it, and confirm the cycle length responds to the load.

Where are the controls on a KUDC03IV?

A full console model carries its controls along the top edge of the door. We test the wiring there when buttons stop responding, since the door flexes every time it opens.

Do the BL0 and WH0 versions of KUDC03IV differ in the wash system?

The final letters of the number mark the finish. The wash system follows the same base model, and we use the full number to match parts. It is rarely the cause of a wash issue.

Book a visit

Book repair for your KUDC03IV

Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.

(713) 903-2606
☎ Call the desk ▤ Schedule Service