KitchenAid KUDD03DT Dishwasher Service
There is a long run of KUDD03DT revisions: the rating plate may show KUDD03DTPA0, PA1, PA2, PA3 or PA10, and KUDD03DTSS is the same base model. We ask for the full code on the phone so the replacement pump or hose matches your exact build.
A puddle that appears under the unit near the end of a cycle usually starts at the drain hose or its clip. We look there first, then check the pump for a hum-without-flow condition, and finish with the diverter and spray system. Mineral scale shows us whether the water in your home has been taxing the heater. We always check that the dishwasher still sits level after the visit, because tilt can aggravate leaks at the clip.
We put the price in writing before we begin, and repairs come with a 30-day workmanship warranty.
The leak is usually at the drain hose or clip, which is under pressure only when the pump runs. We reseat or replace the clip, check the hose for splits, and watch a drain cycle to confirm it stays dry.
Revisions can change small parts such as boards and pumps. Give us the full code from the plate and we will match the correct part to your unit before ordering.
No. A diverter or arm-feed problem sends water to one rack only. We test the diverter, clean the feed passages and confirm both racks are spraying properly.
Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.
