KitchenAid KUDI02FR Dishwasher Repair
Wet dishes at the end of a cycle are the main reason people call about a KUDI02FR. The element is the usual cause, and the KUDI02FRSS is built with the same one. It sits low in the tub and gives out from steady use, not from anything the owner did.
We test the element for continuity, then spin the spray arms and clean their jets. A fill test follows for the inlet valve, and the filter and sump are lifted out and cleaned so we can see how the machine drains. If all four check out, we move on to the control. We tell you which parts are still easy to source for this older model before you approve anything.
You will see a written price before we start, and every repair has a 30-day workmanship warranty.
Most likely. The element may have lost continuity, so the tub never warms. We test it with a meter and replace it if it reads open.
We remove the upper arm, clear the jets and check the bearing. Often a clogged jet or a worn arm bearing is all it takes to restore a full wash on the top rack.
It can. A valve stuck partly open keeps admitting water and overfills the tub. We test and replace it if needed, then confirm a correct fill level on a full cycle.
Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.
