KitchenAid KUDS01VM Dishwasher Service
Owners of the KUDS01VM usually reach us for one of two reasons: water sitting in the bottom after the cycle, or a cycle that will not start at all. The same base model is also sold as the KUDS01VMMT and KUDS01VMSS.
A humming drain pump with a wet tub tells us to test the pump and its impeller path before blaming the hose. A machine that clicks but never starts points toward the latch assembly at the top of the door. We check these first because they are quick to confirm and account for most calls on this model.
A slow, creeping damp patch at the front is often the door seal rather than a hose. We run a cycle with a dry towel at the base of the door to find out. Our written price comes first, and the work is backed for 30 days.
A hum with no water movement suggests the drain pump is powered but jammed or worn. We remove the filter, check for glass or fragments at the impeller, and test the pump motor before looking at anything downstream.
The control will not begin a cycle unless the latch switch confirms the door is closed. A worn latch can leave the door feeling shut while the switch disagrees, so we test the switch with a meter.
Grinding usually means the wash motor bearing is wearing, and continuing to run it can seize the motor. We recommend stopping use until we have listened to it and checked whether debris or the bearing is the cause.
Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.
