Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent KitchenAid specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 903-2606 Schedule Service
Model library · KitchenAid Dishwasher

KUDC25CH

KitchenAid KUDC25CH Dishwasher Service

KitchenAid dishwasher

Most common issues on this model

  1. Door latch switch not telling the control the door is closed
  2. Perished door seal
  3. A burned-out element that never warms the rinse water
  4. Upper arm bearing worn or jammed, so the arm barely turns

The KUDC25CH is a Superba-line dishwasher with a stainless steel interior, six cycles and four options, and it was sold with several color suffixes. If your rating plate reads KUDC25CHBL, BT, SS or WH, you have the same machine under a different ending, and the repairs are identical.

Cycle-will-not-start calls are common on a unit this old. We usually find a latch or latch switch that is not reporting a closed door, so we test the switch with a meter and check the strike for wear. Door seal condition, element continuity and spray arm freedom are checked in the same visit. Because this model is older, we also look over the door hinge springs so the door does not drop open too fast.

Our price is written down before we start, and the repair is covered by a 30-day workmanship warranty.

Key features

  • Superba stainless steel interior dishwasher
  • 6 cycles and 4 options
  • Whisper Quiet Ultima sound reduction system
  • Variants: KUDC25CHBL, KUDC25CHBT, KUDC25CHSS, KUDC25CHWH
→Codes

Error codes this model can show

KUDC25CHKUDC25CH questions
My KUDC25CH hums but will not start a cycle. Is the board gone?

Not necessarily. A latch or latch switch that no longer signals a closed door keeps the control from starting. We test the switch, adjust or replace the latch, and only then look at the control.

Does the suffix on the KUDC25CH matter for repairs?

The ending, such as BL, BT, SS or WH, tells us the panel finish. The working parts are the same, so we match the door seal, latch and element to the KUDC25CH base model.

Why are the dishes on top of my KUDC25CH barely washed?

The upper spray arm may have clogged jets or a worn bearing. We pull it, clear the jets, check that it spins freely, and confirm water pressure reaches it during a test cycle.

Book a visit

Book repair for your KUDC25CH

Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.

☎ Call the desk ▤ Schedule Service