KitchenAid KUDD01DS Dishwasher Service
Most KUDD01DS calls we take involve water in the wrong amount: either the tub fills too far or it does not fill. The KUDD01DSSS stainless version, with a revision code such as KUDD01DSSS0 on the plate, behaves the same way, and the usual suspects sit close together at the lower front of the machine.
We begin with the inlet valve and its screen, then look at the float switch and the sump. An obstructed float can mimic a bad valve, so ruling it out saves a part. Once the water side is sound, we test the control board and touch pad for loose connections or heat damage. We also check the supply line and shutoff valve under the sink, since a half-closed stop mimics a bad inlet valve.
The written price comes first, and our work carries a 30-day workmanship warranty.
Quite possibly, since a valve that has failed shut admits no water. We also check the supply stop, the inlet screen and the float so we do not replace a part that is working.
A float switch held up by debris can tell the control the tub is overfull. We free the float, clean the sump, and run a complete cycle to make sure it finishes.
It identifies the revision of your machine. With the full code in hand we can match the right board, valve or float to that build instead of guessing between similar parts.
Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.
