Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent KitchenAid specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 903-2606 Schedule Service
Model library · KitchenAid Dishwasher

KUDI01FL

KitchenAid KUDI01FL Architect Series Dishwasher Repair

KitchenAid dishwasher

Most common issues on this model

  1. Disposer chamber packed with debris and jamming over the years
  2. Worn hinge and latch parts
  3. Heater element lacking continuity
  4. Pump or motor bearings humming and grinding loudly

The KUDI01FL is an Architect Series 24-inch undercounter dishwasher with a tall tub and a five-level wash system, and it was also sold as KUDI01FLSS, KUDI01FLBT and KUDI01FLWH. Because it is fitted into a cabinet run, repairs begin with easing it forward carefully.

Its hard food disposer is the part that sets it apart from newer machines, and after years of use it can clog or jam. We free the disposer first when the unit hums, then check the door latch and hinge for wear, test the element, and listen for bearing noise from the motor and pump. We also check the lower wash arm and nozzle for blockage while the tub is open.

We quote in writing before starting, and the work has a 30-day workmanship warranty.

Key features

  • 24-inch undercounter dishwasher with a tall tub design
  • Hydro Sweep 5-level wash system
  • Lower wash arm with 4-way action plus a SureWash nozzle
  • Hard food disposer, with a choice of 3 cycles including a high-temp scrub
  • Variants: KUDI01FLSS, KUDI01FLBT, KUDI01FLWH
→Codes

Error codes this model can show

KUDI01FLKUDI01FL questions
My KUDI01FL hums and does not drain. Could the disposer be jammed?

Yes. The hard food disposer can jam on debris and make the motor hum. We clear the chamber, check the impeller and test the motor before suggesting a part.

What does a loose door on a KUDI01FL mean?

Door latch and hinge wear is common at this age. We check the springs, hinge pins and latch, and replace the worn part so the door closes squarely.

Is grinding from my KUDI01FLSS the motor?

Grinding or loud humming usually means the motor or pump bearing is wearing. We locate the noise, clear any debris and replace the assembly if the bearing is worn.

Book a visit

Book repair for your KUDI01FL

Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.

☎ Call the desk ▤ Schedule Service