KitchenAid KUDI02IR Dishwasher Service
If you have a KUDI02IR and the front edge of the cabinet floor is stained or soft, the door seal has probably been seeping for some time. This is a slow problem on an older machine and rarely shows up as a flood.
We start with the seal, comparing its shape to the door channel, and then run a cycle to see if the element warms the tub. Spray arms are removed and checked for blocked jets, and the inlet valve is tested for a clean shutoff. Finding all of this in one visit saves a second trip. If the cabinet floor is damaged, we point out the extent of it so you can plan the next step.
A written price is given first, with a 30-day workmanship warranty on the work.
A hardened door seal probably lets small amounts of water out each cycle. We replace the seal, check the cabinet floor and confirm a dry cycle.
If the element is intact, yes. We test it with a meter at the terminals, and if continuity is lost we replace the element and run a cycle to make sure the tub warms.
The spray arm jets or bearing may be blocked or worn. We clear the jets, check that the arm rotates freely, and test water pressure at the upper arm during a cycle.
Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.
