KitchenAid KUDP01DL Dishwasher Service
When a KUDP01DL goes quiet at the start of a cycle, with the lights on but no water running, the door latch is the first place we look. The model was also sold as KUDP01DLBS and KUDP01DLWH, and the latch is shared by all three.
After the latch, we examine the door seal for flattening and cracks, then test the element with a meter. Spray arms are spun by hand and flushed. A seal that no longer springs back often leaves only a faint damp patch, which is why we check it even when the complaint is something else. We also test the door spring tension, because a door that drops open fast stresses the latch.
A written price comes before the repair, and we cover it for 30 days.
The latch or its switch may not be telling the control the door is shut. We test the switch, check the strike alignment and replace the worn part.
It usually means the door seal has hardened or flattened. We inspect it along the full length and replace it if it no longer seals.
Very likely. We check element continuity with a meter and replace it if it reads open, then run a full cycle to confirm the tub actually warms.
Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.
