Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent KitchenAid specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 903-2606 Schedule Service
Model library · KitchenAid Dishwasher

KDPS424S

KitchenAid KDPS424S Third Rack Dishwasher Repair

Schedule Service(713) 903-2606
KitchenAid dishwasher

Most common issues on this model

  1. Spray jets clogged, including those serving the third rack
  2. Drying fan or vent not moving air, leaving moisture in the tub
  3. Poor draining traced to a plugged filter area
  4. Door latch switch or seal wear

The KDPS424S combines 360-degree Max Jets with a third rack and a ProDry system, and a KDPS424SPS plate refers to the same machine. With jets spread across several levels, a single clog can leave one area visibly dirty.

We trace the water path from filter to arms, clearing every jet we can reach, then confirm the third rack tray slides freely on its rails. Drying problems prompt a check of the fan and vent.

A written price is given before any work, and our repairs include a 30-day workmanship warranty. With so many openings, we also check that each arm turns freely by hand before and after cleaning. The third rack tray should glide on its rails without catching, and the seals where water reaches it should stay dry during a cycle. Everything gets a final test run before we leave.

Key features

  • Third rack with 360-degree Max Jets
  • ProDry system
  • Electric
  • Variants: KDPS424SPS
→Codes

Error codes this model can show

F9E2KitchenAid Dishwasher Code F9E2: drain motor error and clogs FAE4 or F10E4KitchenAid Dishwasher Code FAE4 or F10E4: diverter valve error FAE5 or F10E5KitchenAid Dishwasher Code FAE5 or F10E5: diverter leak, water under the dishwasher Front Status LightsKitchenAid Dishwasher Front Status Light Colors: what blue, red and white mean Front Status Lights Not IlluminatedKitchenAid Dishwasher Front Status Light Not Illuminated: no color during the cycle Glowing RedKitchenAid Dishwasher Sani Rinse Glowing Red: end-of-Cycle sanitize indicator H2OKitchenAid Dishwasher Display H2O: water not detected during fill Sanitize Light FlashingKitchenAid Dishwasher Sanitize Light Flashing: sanitization temperature not met
KDPS424SKDPS424S questions
The third rack of my KDPS424S stays dirty. What is wrong?

A clogged jet or a stiff spray arm is typical. We clean the jets, check the arm, and confirm the filter is not restricting flow.

My KDPS424S leaves dishes wet. Is ProDry broken?

Not necessarily. We check the fan and vent first, since blocked airflow keeps moisture in the tub. If air moves normally, we test the heat side.

Why does my KDPS424S drag when I slide out the third rack?

The rails or wheels on the tray may be worn or dirty. We clean and inspect them, replacing any worn parts so the rack moves smoothly under load.

Book a visit

Book repair for your KDPS424S

Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.

(713) 903-2606
☎ Call the desk ▤ Schedule Service