KitchenAid KDRP767R Element Service
On the KDRP767R, also sold as the KDRP767RSS, cooks sometimes tell us a burner zone will not heat while the rest of the cooktop works, or that one zone only has a full-heat setting. That points to the infinite switch or the element, not the whole range.
We test each surface zone with a meter, replacing a switch that no longer modulates and an element that has lost resistance. After the cooktop we look at the oven side: door hinges and gasket that let heat out of the front, a lock that stays latched after self-clean, and a relay on the control board that has failed. One bad part rarely means the range is done. Zones on this range sit under a smooth top, so we also check that each element is seated firmly against its mounting, since a loose element heats unevenly even when it tests good.
You get the price in writing before work starts, and our repairs have a 30-day workmanship warranty.
Yes, most often. An infinite switch regulates power by cycling the element, and when its contacts weld together the zone cannot cycle. We confirm with a meter and replace the switch.
With the power off, we test the element for resistance and continuity, then test the switch output with the knob at each position. Whichever part fails its reading is replaced, so you do not pay for a good one.
Heat at the front often points to worn hinges or a flattened gasket. We check how the door sits when closed and replace the parts that let heat escape.
Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.
