KitchenAid Older Range Code F1-2: sensor and control check

What F1-2 means

F1-2 on an older KitchenAid range with hyphen-format oven control codes is listed as an oven temperature sensor, control or wiring problem. The control cannot get a dependable oven temperature, and it shows F1-2 in the clock window. Expect baking and broiling to be unavailable while the code is up, since the range will not run the oven without a trustworthy temperature. The wording of the display matters, so please read us the full code.

Common causes of F1-2

The oven temperature sensor has failed or drifted
The control is not reading the sensor correctly
A wire or connector near the sensor is damaged

✓ One safe check you can try

1. Press Cancel and wait for the oven to cool. 2. Remove foil or liners from the oven bottom and walls. 3. Turn the range off at its breaker for one minute, then on again. 4. Try a short preheat at a moderate setting. 5. If F1-2 appears again, leave the oven off and call us for a proper test.

! Why to stop there

Sensor wiring runs through hot, tight spaces at the back of the range
A wrong guess can mean paying for a control the range did not need

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

Remote Indicator LightKitchenAid Commercial-Style Range Remote Indicator Light: Remote-Enabled Sabbath ModeKitchenAid Range "Sabbath Mode": Bake Stays On Sabbath, Sab, 5Ab, or 5A7KitchenAid Range Code Sabbath, Sab, 5Ab, or 5A7: Sabbath Mode is on Start Button BlinkingKitchenAid Range Message "Start Button Blinking": press Start to begin Start Button - Solid LightKitchenAid Range Message "Start Button - Solid Light": Sabbath Mode lighting Temp/Mod KnobKitchenAid Range Message "Temp/Mod Knob": solid white indicator lights Understanding Tones or BeepsKitchenAid Range Message "Understanding Tones or Beeps": when the range sounds White Blinking LightsKitchenAid Range Message "White Blinking Lights": oven waiting at Start

F1-2F1-2 questions

Is F1-2 different from F1-1?

They share the same listed meaning: the oven temperature sensor, the control, or the wiring. We treat them alike during testing, starting with the sensor, and record which reading you saw.

Can I use the stovetop with F1-2 showing?

The code is about the oven, so the surface burners may still work. If the range acts oddly in any way, switch it off at the breaker and call us.

How long does the diagnosis take?

Usually the first visit. We read the code, check the sensor and its wiring, then tell you what we found and quote the price in writing before touching anything else.