KitchenAid Range Code F2 E0: keypad, control or wiring

What F2 E0 means

On KitchenAid freestanding and slide-in ranges, such as the KFEG500ESS or KFGG500ESS, F2 E0 points to the user interface or keypad, the control, or the wiring. That means the touch pads, or the way they talk to the control, are suspect. The display shows F2 E0 where the time normally sits, and some pads may not respond when you press them, which leaves the oven unable to follow your instructions.

Common causes of F2 E0

The user interface or keypad is not sending clean signals
The oven control is misreading the keypad
The wiring between keypad and control is loose or damaged

✓ One safe check you can try

1. Press Cancel and watch the display. 2. Wipe the touch panel with a soft, barely damp cloth and dry it. 3. Shut the breaker feeding the range for about a minute before switching it on again. 4. Press a few pads to see which respond. 5. If F2 E0 returns, stop using the oven and call us.

! Why to stop there

The keypad and control are connected by live wiring behind the panel
Keypad and control problems resemble each other, so testing comes first

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

PUSH or PSHKitchenAid Range Display "PUSH" or "PSH": Start Not Pressed Remote Indicator LightKitchenAid Commercial-Style Range Remote Indicator Light: Remote-Enabled Sabbath ModeKitchenAid Range "Sabbath Mode": Bake Stays On Sabbath, Sab, 5Ab, or 5A7KitchenAid Range Code Sabbath, Sab, 5Ab, or 5A7: Sabbath Mode is on Start Button BlinkingKitchenAid Range Message "Start Button Blinking": press Start to begin Start Button - Solid LightKitchenAid Range Message "Start Button - Solid Light": Sabbath Mode lighting Temp/Mod KnobKitchenAid Range Message "Temp/Mod Knob": solid white indicator lights Understanding Tones or BeepsKitchenAid Range Message "Understanding Tones or Beeps": when the range sounds

F2 E0F2 E0 questions

Why does F2 E0 involve the keypad?

The F2 family points to the user interface or keypad, the control, or the wiring. If the pads send odd signals, the control posts a code instead of acting on them.

Is F2 E0 the same as F2E1 on a commercial-style range?

No. The commercial-style spelling lists knob-off and power-reset steps only. This spaced code on freestanding and slide-in ranges points to the keypad, the control and the wiring, so the checks differ.

Can I live with a bad pad for a while?

We advise stopping use of the oven until we test it. A pad that misreads can keep sending a signal to the control, and it is not worth the risk to cook around a keypad problem.