KitchenAid Commercial-Style Range Code F3E3: meat probe seating and power cycle

What F3E3 means

On KitchenAid commercial-style ranges with knob controls and app connectivity, such as the KFGC500JSS or KFGC506JSS, F3E3 can show up on the mobile app. The listed response is to disconnect power to the oven for one minute, reconnect it, and refresh the app. Where a meat probe is used, make sure it is seated securely in its receptacle. This page covers the commercial-style spelling only.

Common causes of F3E3

The meat probe is not seated securely in its receptacle
A control condition that clears after a one-minute power disconnect
The code returns after power is restored, so the range needs testing

✓ One safe check you can try

1. Remove the meat probe, then push it firmly into the receptacle again. 2. Disconnect power to the oven at the breaker for one minute. 3. Reconnect power. 4. Refresh the KitchenAid app and check for the code. 5. If F3E3 comes back after the power cycle, stop and call us.

! Why to stop there

The probe receptacle is wired into the oven cavity
If a power cycle does not clear it, the cause is beyond what an owner can test

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

White Blinking LightsKitchenAid Range Message "White Blinking Lights": oven waiting at Start WiFi Indicator LightKitchenAid Range Message "WiFi Indicator Light": connectivity status lamp Press Cancel to ResetKitchenAid Range Message "Press Cancel to Reset": Clear the Error Probe or Insert ProbeKitchenAid Range Display "Probe" or "Insert Probe": Meat Probe Needed PUSH or PSHKitchenAid Range Display "PUSH" or "PSH": Start Not Pressed Remote Indicator LightKitchenAid Commercial-Style Range Remote Indicator Light: Remote-Enabled Sabbath ModeKitchenAid Range "Sabbath Mode": Bake Stays On Sabbath, Sab, 5Ab, or 5A7KitchenAid Range Code Sabbath, Sab, 5Ab, or 5A7: Sabbath Mode is on

F3E3F3E3 questions

What should I do first when the app shows F3E3?

Disconnect power to the oven for one minute, reconnect it, and refresh the app. If a meat probe is in use, also check that it sits firmly in its receptacle.

Is F3E3 only an app message?

The code can be seen on the mobile app on a connected range. After the power cycle, refresh the app to see whether it has cleared on both the range and the app.

Do I still need a visit if the code clears?

Not unless it returns. A single clear after a power cycle is fine. If it comes back, call us and we will test the range, then quote a written price before any repair.